ME1500-FD  specifications
        Discontinued!
 

Specifications

Photograps

Manual

Diagram

Back

   
   
 
  • Frequency Coverage: 50-52MHz and 70-72MHz amateur bands,switchable. 
  • Power Output: 1400W PEP or 1000W continuous carrier.
  • Intermodulation Distortion: Better than 35 dB below rated output.
  • Hum and noise: Better than 40 dB below rated output.
  • Harmonic Output Suppression: Better than 70 dB below rated output.
  • Input and Output Impedances:

   - nominal value: 50 Ohm unbalanced,2x UHF (N) type connectors;
   - input circuit: tuned, VSWR <1.5:1
   - Bypass path VSWR < 1.1:2, 4/6m continuously, 100 W maximum;
   - Output (antenna) impedance matching capability: VSWR up to 2:1 
   - Tube: GS35B

  • Protection circuits:Ia>1000mA,Ig1>350mA,TMP>75C,SWR>2
  • RF Gain: 12dB typically, frequency response < 1dB (80-100W drive power for  rated output).
  • Built in 3-way PIC controlled sequencer.
  • Primary Power: 220-240 V AC, 50-60 Hz, single phase, 1800 VA.
  • Complies with CE safety and electromagnetic compatibility requirements.
  • FAN :built in 230V/13W AC fan PAPST type 4605,12V/0.15A DC FAN- optional 120m3 radiall fan is available.
  • Size & Weight : WxDxH: 410x340x185mm,~ 29kg


 Operating environments:
   - temperature range: 0...+50 degs.Celsius;
   - humidity: up to 95% @ +35 degs.Celsius.
   - height: up to 3000m above sea level without output deterioration

   
   
   

Mechanics & Electronics Inc.  1991-2023.  All rights reserved