|
•
Frequency Coverage: 50-52MHz
band. •
IF
in/out Frequency : 28-30MHz
•
LO frq stability: Low phase noise TCXO, Better than
+-1ppm 0-+60C,<0.5ppm @25oC.
•
I/O Impedance : 50 Ohm unbalanced - coax jack UHF type.
•
Input Voltage : 13.8VDC, +-5%, polarity mismatch, 10A
-40dB EMI filter.
•
Power Consumption : 0.46A RX, 5.5A TX @30W output.
•
Size &
Weight : WxDxH: 240x210x70mm, 1.6kg.
RECEIVING
SECTION
•
RX front-end : <1dB NF, >27dBm OIP3,PGA-103+ LNA
•
RX RF mixer : MCL SRA-1H, +17dBm
• RX overall gain :
max. 22dB variable
• IF rejection : >85dB
TRANSMITTING
SECTION
•
Power Output: 30W continuous carrier.
•
IF power input: -20 to +37dBm (switchable built in
att.) Single or two IF cable operation.
• SWR input : 1:1.1
•
Emission modes : CW, SSB, FM, FSK.
• Harmonic Output Suppression: Better than
70 dB below rated output.
FEATURES
-
RA30H0608M Mitsubishi RF Power
Module
-
Built in ext. fan speed controller
circuit
-
LED bargraph Power meter
-
Output PWR poti on the front page
(5-30W)
-
SND jack for ext PA's (GND out when
TX, open collector +50V/0.5A max)
-
ALC circuit
-
Optional fan module (2pcs
50x50mm external fan on holder plate
-
Built in heatsink temp.
sensor
-
IF input & output BNC connectors
-
20A type DC connectors
-
Optional IF RX, TX and PTT cables
• Operating environments: - temperature range: 0...+50 degs.Celsius;
- humidity: up to 95% @ +35 degs.Celsius.
|